Recyclage des chaussées routières
Varsovie (Pologne), 10-11 octobre 2002
Ce séminaire était organisé par l'AIPCR (Comité technique C7/8 des Chaussées routières) et l'Institut de Recherche des Ponts et Chaussées de Pologne.
ACTES DU SÉMINAIRE (disponibles en anglais)
TITLES  | 
PRESENTATIONS  | |
OPENING SESSION - Chairman: Nelson Rioux, Chair, C7/8  | ||
0.1  | 
Introduction to the World Road Association (AIPCR/PIARC). Jean-François Corté, PIARC Secretary General  | 
|
0.2  | 
Presentation of the PIARC Technical Committee on Road Pavements (C7/8). Nelson Rioux, Chair, C7/8  | 
|
0.3  | 
Challenges of pavement rehabilitation in Central and Eastern Europe region. Dariusz Sybilski, Road & Bridge Research Institute, Poland  | 
|
0.4  | 
Why is pavement recycling a preferred pavement rehabilitation approach? Ir. Jan Th. van der Zwan, Road and Hydraulic Engineering Division, Public Works Department, Ministry of Transport, Public Works and Water management, the Netherlands  | 
|
0.5  | 
Environmental Advantages of Recycling. Dr. Roy Smits. Ministry of Transport, Public Works and Water Road and Hydraulic Engineering division P.O. 5044 2600 GA Delft, the Netherlands  | 
|
SESSION 1: IN-PLACE RECYCLING PAVEMENTS  | ||
1.1  | 
Cold in-place recycling of pavements with cement - guideline. Carlos Jofré, IECA, Spain  | 
|
1.2  | 
Cold recycling of bituminous pavements with cement additive in quantity of 5%. Jan Kukielka, TU Lublin, Poland  | 
|
1.3  | 
In Situ Recycling with Cement - the Belgian Experience. André Jasienski, Head of the Department Promotion, Research and Development Rens Luc, Engineer - Infrastructure Federation of the Belgian Cement Industry - FEBELCEM Brussels Belgium  | 
|
1.4  | 
Experience in the UK of recycling with cement for the structural maintenance of pavements. Ellis Sally B Eng(hons) C Eng MICE MIHT, Head of Centre for Sustainability, TRL Limited, UK  | 
|
SESSION 2: IN-PLACE RECYCLING OF PAVEMENTS WITH EMULSION OR FOAMED BITUMEN  | ||
2.1  | 
Cold in-place recycling of pavements with emulsion or foamed bitumen - guideline. Jean-François Corté, PIARC Secretary General  | 
|
2.2  | 
Application of Cold Remix Technology in the Hungarian Road Building. Ágnes Görgényi, Senior Researcher - Zoltán Kubányi, Senior Researcher, Institute for Transport Sciences Ltd., Budapest, Hungary  | 
|
2.3  | 
South African Experience with In situ Recycling with Bitumen Emulsion and Foamed Bitumen. Sadzik Elzbieta MSc Structures, MEng. Transportation, Chief Engineer: Materials, Gauteng, Department of Public Transport, Roads and Works, South Africa  | 
|
2.4  | 
Design of stabilised bitumen mixes for cold recycling of pavements in Estonia. Maano Koppel, Ph. D. Estonian Road Administration Technical Centre, Estonia  | 
|
2.5  | 
Cold and Semi-Hot Recycling of Asphalt Pavement in Sweden. Torbjörn Jacobson, Swedish National Road and Transport Research Institute, SE-581 95 Linköping, Sweden  | 
|
SESSION 3: HOT MIX ASPHALT RECYCLING IN-PLANT  | ||
3.1  | 
Hot Mix Asphalt Recycling in Plant - Guideline. Rudolf Reintjes, the Netherlands  | 
|
3.2  | 
Hot Recycling of asphalt pavements in stationary asphalt plants - Polish experience. Konrad Jablonski, Marek Rybczynski, Polski Asfalt Sp. Poland  | 
|
3.3  | 
Asphalt Pavement Recycling for Hong Kong. Richard Elliott, BSc BEd MPhil, Iswandaru Widyatmoko, BSc MSc PhD, Senior Materials Engineer. Scott Wilson, Pavement Engineering, UK  | 
|
3.4  | 
Hot mix asphalt recycling in the Netherlands. The Road to Success. Ir. Roos H, Harry, VBW-Asfalt (Dutch Asphalt Pavement Association), the Netherlands  | 
|
3.5  | 
Recycling of RA in hot batch mix plant. Arunas Juodbalis AB Kauno tiltai, Vytautas Vilutis SE "Problematika", Lithuania  | 
|