Road Pavement Recycling

Warsaw (Poland), 10-11 October 2002

This Seminar was organised by the PIARC Technical Committee on Road Pavements (C7/8) and the Road and Bridge Research Institute.

SEMINAR PROCEEDINGS

TITLES

PRESENTATIONS

OPENING SESSION - Chairman: Nelson Rioux, Chair, C7/8

0.1

Introduction to the World Road Association (AIPCR/PIARC). Jean-François Corté, PIARC Secretary General

Slides

0.2

Presentation of the PIARC Technical Committee on Road Pavements (C7/8). Nelson Rioux, Chair, C7/8

Slides

0.3

Challenges of pavement rehabilitation in Central and Eastern Europe region. Dariusz Sybilski, Road & Bridge Research Institute, Poland

Paper/ Slides

0.4

Why is pavement recycling a preferred pavement rehabilitation approach? Ir. Jan Th. van der Zwan, Road and Hydraulic Engineering Division, Public Works Department, Ministry of Transport, Public Works and Water management, the Netherlands

Paper/ Slides

0.5

Environmental Advantages of Recycling. Dr. Roy Smits. Ministry of Transport, Public Works and Water Road and Hydraulic Engineering division P.O. 5044 2600 GA Delft, the Netherlands

Paper/ Slides

SESSION 1: IN-PLACE RECYCLING PAVEMENTS

1.1

Cold in-place recycling of pavements with cement - guideline. Carlos Jofré, IECA, Spain

Slides

1.2

Cold recycling of bituminous pavements with cement additive in quantity of 5%. Jan Kukielka, TU Lublin, Poland

Paper/ Slides

1.3

In Situ Recycling with Cement - the Belgian Experience. André Jasienski, Head of the Department Promotion, Research and Development Rens Luc, Engineer - Infrastructure Federation of the Belgian Cement Industry - FEBELCEM Brussels Belgium

Paper/ Slides

1.4

Experience in the UK of recycling with cement for the structural maintenance of pavements. Ellis Sally B Eng(hons) C Eng MICE MIHT, Head of Centre for Sustainability, TRL Limited, UK

Paper/ Slides

SESSION 2: IN-PLACE RECYCLING OF PAVEMENTS WITH EMULSION OR FOAMED BITUMEN

2.1

Cold in-place recycling of pavements with emulsion or foamed bitumen - guideline. Jean-François Corté, PIARC Secretary General

Slides

2.2

Application of Cold Remix Technology in the Hungarian Road Building. Ágnes Görgényi, Senior Researcher - Zoltán Kubányi, Senior Researcher, Institute for Transport Sciences Ltd., Budapest, Hungary

Paper/ Slides

2.3

South African Experience with In situ Recycling with Bitumen Emulsion and Foamed Bitumen. Sadzik Elzbieta MSc Structures, MEng. Transportation, Chief Engineer: Materials, Gauteng, Department of Public Transport, Roads and Works, South Africa

Paper/ Slides

2.4

Design of stabilised bitumen mixes for cold recycling of pavements in Estonia. Maano Koppel, Ph. D. Estonian Road Administration Technical Centre, Estonia

Paper/ Slides

2.5

Cold and Semi-Hot Recycling of Asphalt Pavement in Sweden. Torbjörn Jacobson, Swedish National Road and Transport Research Institute, SE-581 95 Linköping, Sweden

Paper/ Slides

SESSION 3: HOT MIX ASPHALT RECYCLING IN-PLANT

3.1

Hot Mix Asphalt Recycling in Plant - Guideline. Rudolf Reintjes, the Netherlands

Slides

3.2

Hot Recycling of asphalt pavements in stationary asphalt plants - Polish experience. Konrad Jablonski, Marek Rybczynski, Polski Asfalt Sp. Poland

Paper/ Slides

3.3

Asphalt Pavement Recycling for Hong Kong. Richard Elliott, BSc BEd MPhil, Iswandaru Widyatmoko, BSc MSc PhD, Senior Materials Engineer. Scott Wilson, Pavement Engineering, UK

Paper/ Slides

3.4

Hot mix asphalt recycling in the Netherlands. The Road to Success. Ir. Roos H, Harry, VBW-Asfalt (Dutch Asphalt Pavement Association), the Netherlands

Paper/ Slides

3.5

Recycling of RA in hot batch mix plant. Arunas Juodbalis AB Kauno tiltai, Vytautas Vilutis SE "Problematika", Lithuania

Paper/ Slides

The Seminar